英文名称：Chile Kennedy Office building

位置：智利

设计公司：Alemparte-Morelli y AsociadosArquitectos

摄影师：Marcos Mendizabal

这是由Alemparte-Morelli y AsociadosArquitectos设计的Kennedy-Wisconsin办公楼。该项目位于Manquehue-Padre Hurtado地区肯尼迪大街控制性规划范围内，这区域以中等高度的建筑类型为主。面对着这样的场地条件，建筑师设想该项目是一个有能力对肯尼迪大街这样的大尺度城市环境做出影响力的建筑物。场地的角落位置与可见建筑面积决定了建筑共9层，额外一个设备层，总高度35.62米，平面为21.3米*36米。这样的尺寸形成了一个相当扁平的体量，因为其高度与变长相近。因此建筑师更为关注从城市的角度管理这样的建筑条件，将活动（设施）与城市结合。

From the architect. The edificatory  model  contained in the  norm of the Decree of the Regulatorty   Plan  of the Vitacura Municipality  for  Kennedy Ave. in the section of  Manquehue-Padre Hurtado, defines a typology of isolated medium height building,  this condition leads us to conceive this commission  as an architectural piece which by the addition to others may have the capacity to contribute to the configuration  of an urban course on a  large scale such as is Kennedy Ave.

The land in particular,  its corner condition and its buildable area give us   a volume of 9 levels plus mechanical floor,  with a height of 35.62 meters., and a plant of 21.30 meters  per  36.00 meters; these dimensions produce a rather flat volume that  proportionally  to  its height displaces a considerable mass;  Our interest arises from the challenge of managing this condition regarding the city;  how to integrate a prismatic volume which  performs  its activity(services) that throw itself into, with the city?; for this we developed two significant operations: first, to provide the building  envelope with relevant degrees of transparency to enable the citizen, the observer to understand , the activity that takes place in the building without thereby lose  the conditionsof  energy conservation, efficient use of economic resources, which we are  obliged due to the high environmental  comfort  standard   required for office buildings.

Consequently, there has been designed a skin type  "window belt"  between slabs with an exterior structuring made of laminated crystal ribs   that replace the traditional aluminum "mullions"  on the inside, to the above is added   a horizontal  division in  tranches of  two levels  alternating the vertical elements of facade  achieving a "vibrato" of the south facade, east and north, the degree of reflectivity of the glass in "soft code"  does meet the  requested standars of  the project so the facade   contribute to control  thermal gain thus reducing   the initial investment in climate mechanical equipment.

Towards the west facade the building envelope generates a double skin based on aluminum lattice rotated in relation to the facade plane thus  producing  a shadow box adequate to be  protected  against excess light radiation generated by this orientation at the end of the day.The second operation consisted of  set free all  the outdoor spaces, first level to   public use, eliminating cars from the surface,  thus providing the peaton  a better offer of accessibility through a continuous succession of spaces such hard squares to the  program of commercial stores in this level and in the  plinth.

智利Kennedy办公楼外部实景图

智利Kennedy办公楼内部实景图

智利Kennedy办公楼平面图

智利Kennedy办公楼剖面图

智利Kennedy办公楼立面图