苏州凯博易控产业园 | 创新性与实用性兼具的工业建筑设计_建筑_设计案例作品

发布时间：2021-06-22 15:21:47 {{ caseViews }} {{ caseCollects }}

设计亮点

该设计充分考虑了办公与生产空间的需求，实现了工业理念、产品理念、教育共享和员工家庭理念的融合，同时创造性地解决了工厂复杂且分割的工艺流线和人员交流互动之间的矛盾。

项目名称：苏州凯博易控产业园
项目类型：总部办公,工业厂房
设计单位：深圳易加设计有限公司,易加iDEA
设计时间：2018.05
竣工年份：2021.06
主持建筑师：高岩,郭馨
项目负责人：杨剑铀
设计团队：赵东明,黄春平,李秋茹,邓诗尚,卢琼丽,李强,林嘉铭,叶莎,黄辉辉
项目地址：苏州市吴中区龚塘路与迎宾西路交叉路口
建筑面积：137,150㎡
施工图设计团队：启迪设计集团股份有限公司
给排水：王海港,王九成
暖通：祝合虎,郭妮
电气：张哲,张道光
摄影版权：朱晓恒,肖毅

凯博易控项目位于苏州甪直古镇的工业新区，周边工厂林立，多是前店后厂的建筑类型。凯博易控主营业务为电动商务车的发动机生产，是与北欧合作的中国高科技企业的代表之一。为此，业主要求项目兼具创新性和实用性，同时重视如何通过设计让办公和生产空间促生企业文化，厂区内的工作环境和功能区域的设计，要同时体现工业理念、产品理念、教育共享和员工家庭理念。

▼航拍视频，video

Located in the new industrial area of Suzhou, eKontrol’s main business is the motor assembly products of electric automobiles. As one representative of Chinese high-tech companies, the client expects the project to be both innovative and practical to nurture his corporate culture with humanistic working environment. The design needs to reflect visionary concepts for factory production, professional education, and employee wellbeing.

▼总体鸟瞰图，General Aerial View

我们在设计开始便与业主紧密沟通，深入考察凯博现有工厂，并与他们的技术及管理人员进行多次访谈，对象包含车间的技术人员、技术开发的研究人员以及研发中心的科研人员。充分了解厂区的工艺流程及产品技术特点。“扫描”可能与空间环境行为相关的所有因素，最终梳理出八类人群——公司员工、公司股东及管理层人员、员工家属、企业朋友、产业链供应商、企业同行、客户和贵宾要员，绘制出不同人群的空间分布关系图。

Based on closely communication with the stakeholders and thorough inspection of the existing factory, we are committed to satisfy the need of eight user groups, i.e., employees, shareholders, management persons, staff family members, corporate friends, chain suppliers, corporate peers, clients, and VIPs.

▼功能组织构思图，Program analysis

为了能从项目的根本，即厂区内的组织和人的行为层面发现设计创作的原点，我们着手了研究项目功能的组织关系。根据业主最初的策划，工厂除了自持的驱动系统集成中心、销售展示、研发中心、高管中心以及为福利性质的员工俱乐部之外，还有出租给产品合作单位使用的核心零部件制造中心、电机电控制造中心、智能化机械加工中心、传动齿轮箱制造中心和物流仓库。

The design of eKontrol is beneficial because it follows all the favourable causes learned from the systematic research about the complex relationship between the eight user groups in respect of the specific logistic flows of the factory.

▼东南侧产业链供应商办公区入口，View from the South-east towards the independent entrances to other supporting companies

研究发现，制造中心从原材料的加工到产品测试，再到成品的运输存放，不同的生产空间之间均有顺序严格的生产工艺流线。交通方面物流车必须和人员分流，同时需为未来无人驾驶车辆以及人工智能设备的使用功能预留空间可能性。

We settle the key dilemma between logistic flow that needs to be separated and sequential and the staff activities that want integrated and interactive.

▼东北侧视角的主入口，North-east view to the main entrance at the far end

▼办公主入口，Main Entrance View

▼转角立面细部，Close-up view of the corner details

而每个制造中心的生产部门，又有自己对应的办公空间，员工往来于厂房类和业务类空间之间，同时需方便到达服务于全厂职员的员工俱乐部。如果按照工厂最初的前店后厂的类型规划，根本无法解决工艺物流和办公人流不交叉的现代工厂需求。需创造既能保持各技术生产单元各自的独立性，又能促进技术办公人员交流、聚集、研讨、社交的全新厂房空间形式。

Each manufacture partner has its own warehouses and attached offices, where staff need easy access besides convenient connection to the shared space such as the Staff Club and R&D Center. Meanwhile, logistic circulation must be separated from pedestrians. The stereotype of front-shop and back-factory doesn’t work. It is necessary to create a new factory prototype that can maintain the separated and sequential workflow between different manufacture units while promoting communication and interaction between staff.

▼功能组织构思图，Program analysis

▼体块生成，Massinggeneration

Based on experimenting different massing variations, we discomposed the office and warehouse which are initially attached back-to-back and re-distributed the ware houses around a central void. Then each company’s office block is set as the opposite side of the corresponding warehouse and connected through elevated bridges over logistic roads, achieving the complete separation between vehicles and pedestrians. The staff club is designed as a square loop floating between the lobbies on ground floor and the office of each company above, then on the top floor stacked R&D center as a ring overlooking the entire courtyard.

▼北立面及办公主入口，North-West view to the main entrance

通过二层的连廊，无需通过主入口即可直达员工中心，Direct side entrance for staff to the Staff Centre at the 2F without going through the main entrance

至于核心办公建筑所呈现的立面造型，在建筑的功能空间结构确定后，依据企业的功能展示需求，我们将主入口区域抬升半层作为主要的门厅与展厅，与其余办公部分楼层自然而然形成跨层之间的斜向联系。户外设置鼓励员工使用、歇息交流的阳台楼梯；户内则为员工俱乐部和研发中心设置阶梯空间，既可作为空中花园，也是灵活的多功能厅。

For the facade design, we simply increased the height of the main lobby by half story to accommodate an exhibition hall. This operation generates a series undulation to the rest of the office floors and produces oblique connections between different stories, forming several outdoor roof terraces and indoors multi-functional halls.

▼立体流线分析，Circulation analysis

如此一来，外观成为建筑内部空间运作逻辑的直接外显，每一个组成部分都有自己独立的目的，组合在一起形成一个和谐整体，既不同于拼贴式的简单并置，也不是抽离式的减法挖空。移步入院，不同单位办公体块之间的露台，外挂楼梯以及飘在空中的内环研发中心，创造了一个大型“四合院”，再结合园区的景观设计，营造了员工立体多样的交流空间，增强员工之间关系，促进其企业认同感，促生企业文化，最终实现了符合业主利益的八大使用人群的空间设计目标。

The appearance of the HQ becomes a direct manifestation of the way how this building works. It is a natural whole of which its parts are fused together and produces spatial synergy allowing more human interaction and higher productivity. Walking into the courtyard, you will find the views are framed by the under-covered voids at each side of the facade and the circular R&D up in the sky. Together with the landscape,this architecture breeds a volumetric courtyard housing changing scenes over time, strengthening the relationship between colleagues, and promoting the corporate business. The goals set up at the beginning is finally more than fulfilled.

▼从位于四层的研发区望向中庭，View from the R&D Dept.at 4F towards the courtyard

▼中庭人视图，环状研发办公位于顶部，View inside the courtyard with the circular R&D Office at the top

▼中庭人视图，员工餐厅位于二层，View inside the courtyard towards the canteen at 2F

▼透过西侧架空层看向内部的中庭，Framed view towards the west wing through the courtyard

凯博易控项目，通过我们关于机构组织和空间关系的“深度设计”，智性探寻，创造性地解决了工厂复杂且分割的工艺流线和人员交流互动交流之间的矛盾，充分体现了设计创意的价值，不止于实现项目最初的目标，我们期待工厂投入使用后的回访，进一步检验我们当初的设计预判，为后续产业项目积累更多宝贵经验。

The design of eKontrol upholds systematic research for understanding the complex organizational requirements before innovating, letting immanence emerge intelligence. Based on a stereotype of factories in China, the design proposes an innovative solution to settle the key dilemma between the logistic flows that need separation and sequential, and the office staff who favour communication and interaction.

▼从主门厅望向庭院,The Main Lobby Looking towards the Courtyard

▼首层平面图，Ground Floor Plan

▼二层平面图，Second Floor Plan

▼三层平面图，Third Floor Plan

四层平面图，Fourth Floor Plan

▼五层平面图，Fifth Floor Plan

地下车库平面图，Underground Garage Floor Plan

项目名称：苏州凯博易吴中基地

项目类型：总部办公，工业厂房

设计单位：深圳易加设计有限公司；易加iDEA

设计时间：2018.05

竣工年份：2021.06